One For All remote is an advanced universal remote that controls all brands of entertainment devices, including Sony TV. Are you looking for Sony remote replacement, or have you lost your Sony TV original remote? The One For All remote is the best option to control the Sony TV due to its amazing features, and you can have all the benefits of your original remote in the One For All remote. To use this One For All remote for your Sony TV, you will need to program the remote with a code that connects the remote and TV. This post will discuss One For All remote codes For Sony TV and their programming instructions.
Contents
One For All Remote Sony Tv Code List
Usually, remote codes connect the device and remote by scanning the device information and storing the device information in the remote database. However, you must enter the correct code that should match the device model while you are programming the remote. Note the validation code on paper to start programming because the remote code looks similar with minor changes. In this post, I will explain how to program a one for all remote to a sonny TV.
1505
1825
1651
0650
0653
0074
0037
0556
0093
0170
One For All Remote Codes For Sony DVD Player
You can also control the Sony DVD player using One For All remote codes. The DVD player and TV codes look similar; you must find the correct code to program the remote. If you fail to connect the remote to the device, you can try all the codes added in this post until you get the correct code.
0533
1633
1824
0772
0864
1070
1981
2020
1516
2457
2043
1536
2132
How To Program A One For All Remote To A Sony TV
You must follow the code entry method to program the One For All remote this process is same like how to set up one for all remote to hisense tv you can check for your hisense device incase if you have. It is the most straightforward procedure and completes within a minute if you follow all the instructions carefully.
- Turn on your Sony TV or DVD player.
- Now press and hold the “MAGIC” key until the LED light flashes twice.
- After that, keep the remote toward Sony TV or DVD from an appropriate distance.
- Enter the code that you selected for your device.
- The LED light flashes and turns off after entering the code.
- Now press and hold the “POWER” key on the remote. The Sony TV or DVD should turn off. If the device responds to the remote command, the remote is programmed successfully. If not, try to reprogram your remote with the correct code and follow all the instructions from step 1.
Conclusion:
One For All remote programming is much simple, and the manufacturer added all the device codes to connect the remote to the device. If you have any doubts or cannot program your remote, leave a comment to us, and we will try to answer you.