Are you looking for a universal remote to control your Kogan TV, or have you lost your original remote? Don’t worry. I suggest the One For All remote to you because it controls your TV, and you can get all the features of your original remote. However, you will need to program the remote with the correct code to connect The One For all remote to the Kogan Tv. This post will discuss the One For All remote code for Kogan TV and its programming instructions.
Contents
One For All Universal Remote Kogan Code List
The remote manufacturer designs codes to connect the remote to the device because the code scans the device and saves the information in the remote database. The codes mentioned below help you to program the One For All remote and for how to program a one for all remote to a hisense tv you have to check here. You will need to find the correct code matching your device model to program the One For All remote. This post will tell you how to set up one for all remote to Kogan TV.
3572
3296
4291
3528
2888
3505
3434
How To Set Up One For All Remote To Kogan Tv
You must program the remote in the code entry method to connect the One For All remote to the Kogan TV. This method is much simple and complete within a minute. Follow the instructions below.
- Connect all the cables correctly and turn the Kogan TV. (The TV should not be in standby mode)
- Find the “MAGIC” key on the One For All remote to prepare the remote into programming mode.
- Press the “MAGIC” key until the LED indicator blinks twice.
- After this, enter the code you selected for the Kogan TV.
- The LED indicator will blink twice and turn off after receiving the code.
- Now press the “POWER” key on the remote to save the code. If the device turns off, which means the remote was programmed successfully. If your device didn’t respond to the remote command, the remote was programmed with an incorrect code. You will need to program the remote with the correct code.
Conclusion:
The One For all remote programming is much simple when compared with other universal remotes. Always use new batteries in the remote to strengthen infrared signals. You can also try all the codes until you find the correct code. If you have any doubts or errors, leave a comment to us, and we may answer you.