The ideal remote is one you don’t have to think about—it just works. The One For All TCL Replacement Remote (URC4922) is built on this principle. It is designed to be a direct, high-quality replacement for your existing TCL TV remote, eliminating the need for complex setup procedures.
Find Your ONE FOR ALL Remote Control Codes
This guide provides a logical, step-by-step process to ensure your remote is working perfectly. We will begin with the instant, no-setup-required scenario and then proceed to the simple fine-tuning and advanced customization options available to you.
For the majority of TCL televisions, this remote is designed for immediate functionality. Insert two AAA batteries into the compartment. Point the remote at your TCL television and test key functions like Power, Volume, and the arrow keys. If your television responds as expected, your setup is complete. There are no further steps required.
How To Use SimpleSet Method To Program TCL TV Replacement Remote
If your TV does not respond, or if you are using one of the many other compatible brands, this SimpleSet method is the primary tool for syncing your remote. This process is exceptionally clear and user-friendly.
Step 1: Enter Programming Mode:Press and hold the Red and Blue colored keys at the same time until the LED indicator located behind the Power button flashes twice.
Step 2: Locate Your Brand’s Key: Reference the comprehensive chart below. Find your television’s brand and identify the specific key assigned to it.
Step 3: Initiate the Code Scan: Aim the remote at your television and press and hold the assigned key. The remote will now transmit a new power-off command every three seconds.
Step 4: Confirm and Save: The moment your television powers down, immediately release the key. The LED will flash twice to confirm that the correct code is now stored and active.
SimpleSet Brand Key Chart:
| Brand(s) | Key to Hold |
| TCL / Thomson / FFalcon | 1 |
| TD Systems | 2 |
| Blaupunkt / EKO | 3 |
| Alba / Bush / Goodmans | 4 |
| Daewoo | 5 |
| Grundig | 6 |
| Hitachi | 7 |
| JVC | 8 |
| Medion | 9 |
| Polaroid | Guide |
| Technika | 0 |
| ok. / Vestel / Techwood / Kendo / Onn / Digihome / Tucson | Pre-CH |
| Telefunken | Red Key |
| Toshiba | Green Key |
| Kogan / Veon | Yellow Key |
| Other Brands | Blue Key |
How to Program Your TCL Replacement (URC4922) Remote
For users with unlisted brands or those who wish to add unique functionality, these manual methods offer complete control. If your brand is not on the SimpleSet list, you can program the remote by entering a four-digit code from the manual.
Step 1: Locate Your 4-Digit Code You will need the code list that was included with your remote’s original packaging. Find the section for your TV brand (e.g., Thomson) and note the first four-digit code listed.
Step 2: Prepare the Remote for Programming Press and hold the Red and Blue keys simultaneously. Continue holding them until the LED behind the Power button flashes twice, signaling it is in programming mode.
Step 3: Enter the Code Using the number pad, carefully enter the four-digit code you located in Step 1. After you press the fourth digit, the LED will blink twice and then go out.
Step 4: Test and Confirm Aim the remote at your TV and press the
Power key. If the television turns off, the setup is successful. If it does not, simply repeat this entire four-step process using the next code in the list for your brand
How To Activate the Learning Feature
This remote can copy any command from your original, working remote control.
- Enter Learning Mode by holding Red + Blue until the LED blinks twice, then pressing 975.
- Press the key on the TCL remote where you want to store a new function. The LED will flash rapidly.
- Press the corresponding key on your original remote. A double blink confirms the function was learned.
- Once you are done, press and hold the OK key until the LED blinks twice to save and exit.
How to Program App Shortcut Keys
The Netflix, YouTube, and FPLAY keys can be programmed with a macro to launch any streaming service on your TV.
- Determine the sequence of keys needed to open your desired app.
- Press and hold the app key you want to program (e.g., NETFLIX) until the LED blinks twice and stays lit.
- Perform the key sequence on the remote.
- Once the app has launched on screen, press and hold the same app key until the LED blinks twice and goes out to store the sequence.
My TV is a Thomson, not a TCL. Why is it included in this remote’s setup?
Thomson and TCL are related brands that often share the same remote control technology. This remote is designed to work perfectly with Thomson and several other brands, which you can find in the SimpleSet chart. If you need to control multiple devices from a wide variety of unrelated brands, a true universal remote like the Essence 8 is a more powerful solution. Just use the key assigned to your brand for a quick setup.
What does the “Other Brands” option that uses the Blue Key do?
If your TV brand is not specifically listed in the SimpleSet chart, the remote has a built-in search feature. When you hold down the Blue key during the SimpleSet process, the remote will automatically cycle through the codes for many other less common TV brands until it finds a match. This is a simplified version of the manual code search method found on more traditional universal remotes.
Can I make the FPLAY button open Disney+?
Yes. The app shortcut keys are fully programmable. If your TV has the Disney+ app, you can follow the macro programming steps to record the sequence needed to open it and assign that sequence to the FPLAY key or any of the other app shortcut buttons.
How do I delete a single function that I programmed using the Learning feature?
To erase a learned command, you can enter a specific delete mode. Press and hold Red + Blue until the LED blinks twice, then press 976. To finish, press the key you want to reset twice.
Conclusion
The One For All TCL Replacement Remote is an exemplary tool focused on providing a seamless and upgraded user experience. Its out-of-the-box compatibility and highly intuitive SimpleSet method resolve setup challenges for the vast majority of users, while its deeper customization options ensure that no function is ever out of reach. It is a well-designed, practical solution for any TCL TV owner.
Add Comment