If you’re looking to simplify your living room by consolidating your controllers, the One For All Contour 4 is a capable and reliable choice. It’s designed to command up to four different devices, bringing your entire home entertainment system under a single point of control.
Find Your ONE FOR ALL Remote Control Codes
This guide is structured to give you the most direct path to a successful setup. You will find clear instructions for programming your devices and customizing the remote’s features to perfectly suit your needs. Before you begin, you will need to insert two AAA batteries.
How To Program Your Contour 4 Remote with Direct Code Entry Method
This protocol uses a specific four-digit code for your device, ensuring the most accurate and complete functionality.
- Locate Your Device Code: Your first step is to consult the code list that came with your remote. Find the section for your device type (e.g., TV, SAT) and brand, and write down the first four-digit code provided.
- Power On Your Equipment: You must ensure the device you are programming is turned on.
- Prepare the Remote: Press the appropriate device key on your Contour 4 remote (for example, TV).
- Enter Programming Mode: You will now press and hold the SETUP key. The red LED indicator will blink once, then twice, before staying on. This signals the remote is ready for programming.
- Input the Code: Enter the four-digit code you found earlier. Upon entering the final digit, the red LED will blink twice and then turn off.
- Verify the Connection: You should now aim the remote at your device and press the POWER key. If your device powers down, the setup is complete. If it does not, you will need to repeat this process using the next code listed for your brand.
How To Setup Using Code Search Method ( if Above Method Not working)
In the event you cannot find a code for your brand, this method will scan the remote’s entire internal library to find a match. Be aware that this process can take a few minutes.
- Turn on your device and select its corresponding key on the Contour 4.
- Hold the SETUP key until the red LED remains lit.
- Enter the code 9 9 1. The red LED will confirm by blinking twice.
- Aim the remote at your device and press POWER once.
- You will now repeatedly press CH+. With each press, the remote tests a new code.
- The moment your device turns off, you must immediately press the SETUP key to lock in the code.
How To Use Learning Function Effectively
You can teach your Contour 4 any command from your original, working remotes. This is perfect for adding a function that may be missing.
- Select the device mode you wish to add a command to.
- Hold the SETUP key until the red LED stays on.
- Enter the code 9 7 5.
- Press the key on the Contour 4 that you want to program. The red LED will flash rapidly.
- Press the key on your original remote. A double blink from the Contour 4’s LED indicates the command was successfully captured.
- After you have finished, press and hold the SETUP key until the red LED blinks twice to save.
How To Setup Volume Lock Contour 4 (URC 1240)
You can set the remote’s volume controls to always operate a single device (like your TV or amplifier), no matter which mode is active. For users with more advanced needs, the Contour 8 can control up to eight devices and offers similar audio integration features.
- To Lock Volume: Hold SETUP until the red LED is lit, press 9 9 3, and then press the device key for your primary audio device (e.g., TV). The LED will blink twice to confirm.
- To Deactivate Volume Lock: Hold SETUP until the red LED is lit, press 9 9 3, and then press VOL-. The LED will blink four times.
You’ve entered a code and it works, but some functions are missing. What should you do?
This often means you’ve found a partially compatible code. Your best course of action is to repeat the Direct Code Setup process using the next four-digit code listed for your brand, as it may offer more complete functionality.
How can you control your TV’s volume while you’re in SAT mode?
This is the primary function of the Volume Lock feature. By following the steps in this guide, you can lock the volume commands to your TV, allowing you to adjust the audio level without ever switching away from your satellite or cable box mode.
What is the purpose of the Learning function if the remote can be programmed with codes?
The Learning function is your tool for perfect customization. If your original remote had a unique or rare function that isn’t included in the standard code set (like a specific picture mode or input shortcut), you can use Learning to transfer that exact command to a key on your Contour 4. This is a powerful way of programming your remote without needing a code list at all
Conclusion
The One For All Contour 4 is a powerful tool for unifying your home entertainment system. By methodically following the setup protocols outlined in this guide, you can achieve a reliable and precise connection with your devices. Investing a few extra moments to customize features like Learning and Volume Lock will further enhance your experience, resulting in a single, intuitive controller tailored to your needs.
Add Comment