You have the One For All Toshiba Replacement Remote, a controller specifically engineered to be a perfect and immediate substitute for your original Toshiba TV remote. It is designed for simplicity and, in most cases, will work the moment you put the batteries in without need of codes.
This guide will provide you with a clear, step-by-step process for every scenario, from the initial instant setup to fine-tuning individual keys and even learning functions from another remote.
How To Setup URC 1919 Toshiba TV Replacement Remote
Your first goal is to establish a connection with your television. For most users, this will be an effortless, one-step process. This remote is pre-programmed to control the majority of modern Toshiba TVs without any setup.
- Your first and only step for this method is to insert two AAA batteries. After doing so, you should point the remote at your TV and test common functions like Power and Volume. If your TV responds, your setup is complete.
If your TV does not respond after you insert the batteries, you will need to sync the remote to your specific TV model by using this simple search process.
- Prepare Your TV: You must ensure your television is powered on and not in standby mode.
- Enter Programming Mode: On your new remote, you will press and hold the RED and BLUE keys at the same time until the LED indicator located behind the Power button flashes twice.
- Initiate the Code Search: You should now aim the remote at your TV and press and hold the POWER KEY. The remote will begin to transmit a new power-off signal every three seconds as it searches for the correct code for your TV.
- Confirm and Save the Code: The moment your television turns off, you must immediately release the POWER KEY. The LED will blink twice to confirm that the correct code has been saved. You can now test the other keys on the remote to ensure full functionality.
How To Correct Individual Key Functions
After the initial setup, you may want to correct a specific key or add a new function. These next steps provide you with complete control over your remote’s layout. For users who need this level of control across multiple devices, a more advanced model like the One For All Smart Control can manage up to five devices with custom Activities. If you find that most keys work correctly but a specific button (like MENU) does not perform the right action, you can use this fine-tuning process.
- Enter Fine-Tuning Mode: With your TV powered on, you will press and hold the RED and BLUE keys until the LED indicator blinks twice.
- Select and Hold the Problem Key: You should aim the remote at your TV and press and hold the single key that is not working correctly.
- Wait for the Correct Function: The remote will now transmit a new signal for that specific function every three seconds.
- Confirm the Correction: When you see the correct function appear on your TV screen (e.g., the menu opens), you must immediately release the key. The LED will blink twice, confirming that the new, correct command has been saved for that key.
How To Use Learning Feature In URC 1919 Remote
Your new remote can learn any function from your original, working remote control. This is the perfect tool for adding a command from a different device, such as the volume controls for a soundbar.
- Enter Learning Mode: You will need to hold the GREEN and YELLOW keys until the LED blinks twice. Then, you must press 975.
- Select a Target Key: On your new remote, press the key where you wish to store the function (e.g., VOL +).
- Transmit the Command: Press the corresponding key on your original remote. A double blink from the new remote’s LED confirms the function has been successfully learned.
- Save Your Settings: When you have finished, you must press and hold the OK KEY for 3 seconds to save all new commands.
You tried the Primary Sync Method, and the remote now turns the TV on and off, but the arrow keys don’t work. What should you do?
This indicates that the remote has found a code that is only partially compatible. Your next step should be to use the “Fine-Tuning Process” detailed in above section to correct the functions of the specific keys that are not working. If this process fails or the remote is not responding at all, you may need to consult our full guide on what to do when your One For All remote is not working.
Your original remote is broken. Can you still set up this new remote?
Yes, absolutely. You will not be able to use the Learning feature, but you can still achieve full functionality by completing the Primary Sync Method and, if necessary, the Fine-Tuning Process.
You made a mistake while using the Learning feature. How can you erase a command from a single key?
To delete a learned function and restore a key to its original command, you can hold the GREEN and YELLOW keys until the LED blinks twice. Then, you will press 976. Finally, you must press the key you wish to reset twice. For a more detailed walkthrough of the entire copy and paste system, see our guide on the Learning feature which allows programming without codes. The LED will blink twice, confirming the learned command has been erased.
Conclusion
You are now equipped with all the knowledge needed to program and customize your One For All Toshiba Replacement Remote. By following these clear, sequential steps, you can ensure a perfect sync with your television and even add unique functions, resulting in a superior and more personalized viewing experience.
Add Comment