Logik TV Code For One For All Remote & Program

The One For All remote is a universal remote that controls video and audio devices. If you have lost your Logik TV remote, the One For All remote is the best replacement option because the One For All remote is compatible with Logik TV, and you can get all the functions of your original remote in the One For all remote. This post will discuss Logik TV codes for One For All remote and their programming instructions.


One For All Logik Tv Code List

Here you can see One For All Logik TV codes for the One For All remote, which allow the remote to connect with Logik TV . You must enter the correct code based on your device model example bush tv codes for one for all remote same way below codes are for logik. The code entered on the remote during the program identifies the device type and stores the code on the remote database.












How To Set Up One For All Remote To Logik Tv 

You will need to enter a compatible code while programming the remote. The One For All remote programming is much simple when compared with other universal remotes. Below, I will tell you how to set up a One For All remote to Logik TV.

  1. Turn on your Logik TV.
  2. Insert new batteries into the remote to strengthen remote signals.
  3. Find the “MAGIC” button on the remote and hold it until the LED indicator flashes twice.
  4. Now enter the code that you selected for Logik TV. The LED indicator blinks twice and goes off after entering the code.
  5. Now press the “Power” key on the remote to turn off the TV if the TV responds to the remote command, which means the remote is programmed successfully. If not, try to reprogram the remote with the following code. If you fail to connect the remote or enter an incorrect code, you can try all the codes listed above until your remote is programmed successfully.


Read all the information before starting remote programming and find the correct code matching your device model. Sometimes remote may program correctly, but the functions may not work as you expected, which means the remote is programmed partially. You will need to reprogram the remote using the correct code. If you have any doubts or your remote doesn’t work even after you follow all the instructions carefully, leave a comment, and we will try to answer you.

Leave a Comment