How To Program One For All LG Replacement Remote (URC-4911)

The One For All LG Replacement Remote is engineered to be a superior, dedicated controller for your television. It is designed to work instantly with most modern LG TVs and offers a deep level of customization for a truly integrated home entertainment experience.

This guide is presented in a structured, modular format to allow you to easily find the information you need. Please begin with section 1.0 after inserting two AAA batteries into your remote.

1.0 | How To Setup Your TV With LG URC-4911 Replacement Remote

This module covers the essential setup to ensure your remote is perfectly synced with your LG television. For the majority of users, this remote will work immediately out of the box. Point the remote at your TV and test the basic functions. If they work, your setup is complete.

If the remote does not work, you must sync it using this primary search method:

1. Ensure your TV is powered on.
2. Press and hold the Red and Blue keys simultaneously until the LED behind the Power button flashes twice.
3. Aim the remote at your TV and press and hold the Power key.
4. The remote will now transmit a power-off signal every three seconds. The moment your television turns off, you must immediately release the Power key.
5. The LED will blink twice to confirm the code is stored. Test the other functions on the remote to verify full compatibility.

1.2 | How Fix Keys Which are Not Working Properly

If the primary setup works but a few specific keys do not function as expected, use this process to fine-tune individual commands without starting over.

1. With your TV on, enter this mode by holding Red + Blue until the LED blinks twice.
2. Aim the remote at the TV and press and hold the specific key that is not working correctly (for example, the MENU key).
3. The remote will send a new command for that function every 3 seconds.
4. When the correct function appears on your TV screen (e.g., the main menu opens), immediately release the key. The LED will blink twice, confirming the new command is saved for that key.

2.0 | How To Program Audio Devices with LG Remote Replacement Using SimpleSet

This module is dedicated to configuring the remote to control the volume of an external soundbar or AV receiver. This method is for popular audio device brands.

1. Ensure both your TV and audio device are on and playing sound.
2. Press and hold the Volume Up and Volume Down keys together until the LED under the POWER key blinks twice.
3. Find your audio brand’s assigned digit at the starting of the article.
4. Hold down that digit. The remote will send a Mute command every 3 seconds.
5. When your audio device mutes, release the digit to save the setting. The Volume keys will now control your audio device.

2.2 | Manual Setup (Audio Code Setup)

For all other brands, use this method with a four-digit code from the manual.

1. Hold Volume Up + Volume Down until the LED blinks twice.
2. Enter the four-digit code for your audio brand from the Audio Codelist at the starting of the article codes list. The LED will blink twice on the last digit.
3. Test the Volume Up, Down, and Mute keys to confirm functionality. If they do not work, repeat the process with the next code in the list.

3.0 | How To Use Learning & App Shortcut Features

3.1 | The Learning Function (Command Cloning)

This allows you to copy any function from any other working infrared remote.

1. Hold Green + Yellow until the LED blinks twice.
2. Press 975.
3. Press the key on the One For All remote where you want to store a function.
4. Press the corresponding key on your original remote. A double blink confirms success.
5. When finished, press and hold OK for 3 seconds to save.

3.2 | App Shortcut Programming (Macros)

The App, Netflix, and Prime Video keys can be programmed with a macro to launch any app on your TV.

1. Determine the sequence of keys needed to open your desired app.
2. Press and hold the app key you want to program until the LED blinks twice.
3. Perform the key sequence.
4. Once the app opens, press and hold the same app key until the LED blinks twice and goes out to store the macro.

4.0 | How To Do the Reset and Power Macro

4.1 | Power Macro: If you have set up an audio device, you can press and hold the Power key for three seconds. This will send a power command to both your TV and your audio device simultaneously.

4.2 | Factory Reset: To restore your remote to its original, out-of-the-box settings:

1. Hold down the Green and Yellow keys until the LED blinks twice.
2. Press 977.
3. The LED will blink 4 times, and the remote is now fully reset.

Conclusion

The One For All LG Replacement Remote is a powerful and intuitive controller designed to be the perfect counterpart to your television. Its logical setup process, from the instant-sync functionality to the detailed key correction and audio integration modules, ensures any user can achieve a complete and customized setup with ease.