How To Program OFA Essence 4 URC 1241 Remote

If you’re looking to end the clutter of multiple remote controls, you’ve found the right tool for the job. The One For All Essence 4 is designed to be the single point of control for up to four different entertainment devices, bringing a welcome sense of order to your living room. For more complex setups, the Essence 8 model controls up to eight devices. This guide is structured in logical modules to walk you through the entire process, from the initial, simple setup of your devices to using the remote’s advanced features for a truly customized experience.

Your first goal is to program your devices. You should repeat the chosen setup process for each of your four devices. Before you begin, please insert two AAA batteries.

How To Program Essence 4 URC 1241 Remote With SimpleSet™

This is the most efficient way to program the majority of popular brands.

1. Prepare Your Equipment: You must first ensure the device you want to program (e.g., your TV) is powered on.
2. Select a Device on the Remote: You need to press the correct device key on your Essence 4 remote (e.g., TV).
3. Enter Programming Mode: Press and hold the SETUP key until the LED under the device key blinks twice.
4. Find and Hold Your Brand’s Digit: You should find your device’s brand in the SimpleSet list that came with your remote and note the digit assigned to it. Press and hold this digit.
5. Complete the Sync: The remote will now send a power-off command every three seconds. The moment your device turns off, you must immediately release the digit. The remote is now programmed.

How Program Essence 4 Remote Using Setup by Code

If your brand is not on the SimpleSet list, you will need to use this manual method.

1. Find Your Code: You will need to locate your brand in the full code list provided with your remote. Note the first four-digit code.
2. Enter Programming Mode: After selecting the correct device key, you will press and hold the SETUP key until the LED blinks twice.
3. Enter the 4-Digit Code: Using the number pad, you will now enter the code you found in step 1. The LED will blink twice after the final digit is entered.
4. Verify Functionality: You can now test the remote by aiming it at your device and pressing the POWER key. If it does not work, you should repeat the process with the next code in the list for your brand.

How To Use Learning Function in URC 1241 Remote

Your Essence 4 remote can learn any function from your original, working remote.

1. Enter Learning Mode: You will need to hold the SETUP key until the LED blinks twice, then you must press 975.
2. Select a Key to Program: You need to press the key on the Essence 4 remote where you wish to store the new command.
3. Transmit the Command: Press the corresponding key on your original remote. A double blink from the Essence 4’s LED will confirm that the command has been learned successfully.
4. Save Your Work: Once you have finished, you must press and hold the SETUP key until the LED blinks twice to save and exit.

How To Do Volume Lock In Essence 4 Remote

This feature allows you to lock the volume controls to a single device (like your TV or soundbar). For a more advanced configuration, including how to remove a single device from the volume lock, see our detailed guide.

• To Lock Volume:
  1. Hold the SETUP key until the LED blinks twice, then press 993.
  2. Press the device key for your primary audio device (e.g., AUD). The LED will blink twice to confirm the lock.
• To Unlock Volume:
  1. Hold the SETUP key until the LED blinks twice, then press 993.
  2. Press Volume Down. The LED will blink four times to confirm the lock is removed.

Conclusion

You are now equipped with the knowledge to fully program and customize your One For All Essence 4 remote. By following these modules, you can quickly establish control over your devices and tailor the remote’s advanced features to create a simple and powerful entertainment experience.