How To Setup One For All Apple TV URC 1110 Remote

While the original Apple TV remote is known for its minimalist design, you often need more to control your complete setup. The One For All Apple TV Remote is the perfect solution, designed to give you back full command over your television and soundbar while providing a familiar and intuitive layout for navigating your Apple TV.

This guide is structured in logical modules to provide a clear path from initial setup to advanced customization, helping you program your universal remote to create a single, unified controller for your entire streaming experience. To begin, you will need to insert two AAA batteries.While this remote is ideal for Apple TV, users with other systems like Amazon Fire TV can find a dedicated remote solution that works via Bluetooth.

Your first goal is to sync the remote with all of your devices. This remote is pre-programmed to control your Apple TV immediately. After you have inserted the batteries, you should point the remote at your Apple TV and test the navigation and OK keys. It should work without any setup required.

How To Setup TV In URC 1110 Remote Using SimpleSet™

Next, you will program the remote to control your television’s basic functions (Volume, Mute, and Power).

1. Find Your Brand’s Digit: You will first need to find your TV’s brand in the list above and note the digit assigned to it.
2. Enter Programming Mode: You must press and hold the TV POWER and BACK keys simultaneously for 3 seconds. The LED indicator will stay on.
3. Complete the Sync: You should now aim the remote at your TV and press and hold the digit for your brand. The remote will send a power-off command every 3 seconds. The moment your television turns off, you must immediately release the digit. Your TV is now programmed.

How To Setup Audio Using SimpleSet™ In URC 1110 Remote

Finally, you can program the remote to control the volume of your soundbar or AV receiver.

1. Find Your Brand’s Digit: You will need to find your audio device’s brand in the list above and note the digit assigned to it.
2. Enter Programming Mode: You must press and hold the VOLUME UP and VOLUME DOWN keys simultaneously for 3 seconds. The LED indicator will stay on.
3. Complete the Sync: You should now aim the remote at your audio device (which must be powered on) and press and hold the digit for your brand.
4. The remote will send a mute command every 3 seconds. The moment your device mutes, you must immediately release the digit. Your audio device is now programmed.

How to Learn a New Command

Your URC 1110 remote can learn any function from your original, working remotes. This is the perfect tool for adding a command that may be missing, a process sometimes called cloning commands to add a missing function.

1. Enter Learning Mode: You will need to hold the GREEN and YELLOW keys until the LED blinks twice. Then, you must press 975.
2. Select a Key to Program: On your URC 1110 remote, press the key where you wish to store the new command (e.g., LIVE TV).
3. Transmit the Command: Press the corresponding key on your original remote. A double blink from the URC 1110’s LED confirms the function has been successfully learned.
4. Save Your Settings: When you have finished, you must press and hold the OK key for 3 seconds to save all new commands.

How to Delete a Learned Command

If you make a mistake, you can easily erase a learned function.

1. Hold the GREEN and YELLOW keys until the LED blinks twice.
2. Press 976.
3. Press the key you wish to reset twice. The LED will blink twice, confirming the learned command has been erased.

Conclusion

Your setup is now complete. By following this guide, you have transformed three separate controllers into one seamless device. You no longer need to switch remotes to change the volume or turn off your TV; you now have a single, powerful remote that is perfectly tailored to your Apple TV setup. Enjoy the simplicity and control you’ve created.